Breville 2400w Instruction Booklet page 10

using your iron
Anti-drip feature
When the temperature of your iron is insufficient to create steam, the supply of water is
cut off automatically to avoid any drips from the soleplate.
Anti-scale filter
Your iron is fitted with a permanent anti-scale filter. This filter is fixed and cannot be
removed for cleaning.
The filter is designed to reduce the build-up of limescale inside your iron. Limescale
occurs during steam ironing due to water hardness.
Water hardness varies from one area to another. The effectiveness of the filter will
depend on how 'hard' your water is.
Safety auto shut-off function
ALWAYS disconnect your iron from the mains supply socket after use. NEVER
leave the iron unattended with the auto shut-off function in operation.
Your iron will shut off if it has not been used for 15 minutes when resting on its heel, or 30
seconds with the soleplate face down. The STANDBY light will flash indicating that your
iron is now in auto-shut off mode. To restart your iron, either press the +/- buttons or move
your iron gently. The iron will revert back to its previous setting.
10