Ironing Without Steam; Steam Ironing - Breville 2400w Instruction Booklet

using your iron

Ironing without steam

If you intend to dry-iron fabrics there is no need to fill the water tank. However, if water is
already in the water tank, you don't need to empty it.
1. Set the steam control to the off position (0).
2. Plug your iron in to the mains supply socket and switch the socket on. The STANDBY
and lights will illuminate.
l
3. Press the temperature select +/- buttons to select the temperature setting appropriate
to the fabric type being ironed. For example, if you select the
STANDBY, and
l
heats up. When the
and ready to use.
4. During use, the
temperature.

Steam ironing

If you do not allow your iron to reach the selected temperature, water may drip
from the soleplate during steam ironing.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
When ironing cotton and linen, always select the highest temperature. Steam should
never be used on delicate fabrics like nylons, acrylics and synthetics.
1. Fill your iron with water.
2. Plug your iron into the mains supply and switch on.
3. Use the temperature select +/- buttons to select the
your iron, the more steam is generated.
4. When the
lll
and ready to use. During use, the
maintains the selected temperature.
5. Adjust the steam control lever to select the desired steam output.
6. Move the steam control lever to the high steam ( ) setting to increase the amount of
steam, or towards the off (0) setting to decrease the amount of steam.
7. The steam can be shut off at any time by setting the steam control to the off (0)
position.
8
lights will illuminate and the
ll
light stops flashing, your iron is at the correct temperature
lll
light will flash periodically as your iron maintains the selected
lll
or MAX light stops flashing, your iron is at the correct temperature
lll
light will flash as your iron
lll
or MAX setting. The hotter
lll
or MAX light will flash periodically as your iron
setting, the
lll