Channel Interleaving; Rank Interleaving; Cpu Voltage Control - Gigabyte GA-78LMT-USB3 User Manual

& TwTr Command Delay
Options are: Auto (default), 4T~7T.
& Trfc0 for DIMM1, DIMM3
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
& Trfc1 for DIMM2, DIMM4
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
& Write Recovery Time
Options are: Auto (default), 5T~8T, 10T, 12T.
& Precharge Time
Options are: Auto (default), 4T~7T.
& Row Cycle Time
Options are: Auto (default), 11T~42T.
& RAS to RAS Delay
Options are: Auto (default), 4T~7T.
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. (Default: Enabled)
& DQS Training Control
Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS)
& Memclock tri-stating
Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled)
******** System Voltage Optimized ********
& System Voltage Control
Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system
voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto)
& NorthBridge Volt Control
Allows you to set the North Bridge voltage.
Normal
+0.1V ~ +0.3V
& DDR3 Voltage
Allows you to set memory voltage.
Normal
1.500V ~ 1.900V
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
& CPU Voltage Control
Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is
dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
Supplies the North Bridge voltage as required. (Default)
The adjustable range is from 0.1V to 0.3V.
Supplies the memory voltage as required. (Default)
The adjustable range is from 1.500V to 1.900V.
- 28 -