Honda 2006 CR-V Owner's Manual page 210

Main Menu Table of Contents
Replacing a High-mount Brake
Light Bulb
COVER
Open the tailgate. Remove the
1.
light assembly cover by pushing in
on the tabs on both sides and
pulling the cover off.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
BULB
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Press the brake pedal to make
sure the new bulb is working.
5. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
6. Put the cover back on the light
assembly. Push it in until it locks
in place.
Lights
207