ASROCK C216 WS User Manual page 46

DRAM tRAS
Use this item to change RAS# Active Time (tRAS) Auto/Manual setting.
The default is [Auto].
Command Rate (CR)
Use this item to change Command Rate (CR) Auto/Manual setting. The
default is [Auto].
DRAM tWR
Use this item to change Write Recovery Time (tWR) Auto/Manual setting.
The default is [Auto].
DRAM tRFC
Use this item to change Refresh Cyle Time (tRFC) Auto/Manual setting.
The default is [Auto].
DRAM tRRD
Use this item to change RAS to RAS Delay (tRRD) Auto/Manual setting.
The default is [Auto].
DRAM tWTR
Use this item to change Write to Read Delay (tWTR) Auto/Manual setting.
The default is [Auto].
DRAM tRTP
Use this item to change Read to Precharge (tRTP) Auto/Manual setting.
The default is [Auto].
DRAM tFAW
Use this item to change Four Activate Window (tFAW) Auto/Manual set-
ting. The default is [Auto].
DRAM tCWL
Use this item to change CAS# Write Latency (tCWL) Auto/Manual setting.
The default is [Auto].
tREFI
Use this item to change tREFI setting. The default is [Auto].
tCKE
Use this item to change tCKE setting. The default is [Auto].
tWRDR(DD)
Use this item to change tWRDR(DD) setting. The default is [Auto].
tRWDR(DD)
Use this item to change tRWDR(DD) setting. The default is [Auto].
tRWSR
Use this item to change tRWSR setting. The default is [Auto].
tRRDD
Use this item to change tRRDD setting. The default is [Auto].
46