Driver Installation And Setup - ASROCK C216 WS User Manual

2.7.2 Driver Installation and Setup

Step 1. Power on your computer and boot into OS.
Step 2. Remove the ATI
system.
The Catalyst Uninstaller is an optional download. We recommend using this
utility to uninstall any previously installed Catalyst drivers prior to installation.
Please check AMD website for ATI
Step 3. Install the required drivers to your system.
For Windows
Install the CATALYST Control Center. Please check AMD website for de-
tails.
Step 4. Restart your computer.
Step 5. Install the VGA card drivers to your system, and restart your computer.
Then you will ind "ATI Catalyst Control Center" on your Windows
ATI Catalyst Control Center
Step 6. Double-click "ATI Catalyst Control Center". Click "View", select "CrossFi-
TM
reX ", and then check the item "Enable CrossFireX
and click "Apply" (if you install two Radeon graphics cards). Select "3
GPUs" and click "OK" (if you install three Radeon graphics cards).
TM
driver if you have any VGA driver installed in your
TM
driver updates.
®
8 / 7 OS:
26
®
taskbar.
TM
". Select "2 GPUs"