About The Aegis Secure Key 3.0; Pin Requirements; Battery Note - Apricorn Aegis Secure Key 3.0 User Manual

About the Aegis Secure Key 3.0

3
2
Note: It's normal for this device to
be warm to the touch during use.

PIN Requirements

PINs must be a minimum of seven
digits and a maximum of 16 digits.
Cannot contain all sequential
numbers (e.g., 01234567, 9876543)
and cannot contain all of the same
number (e.g., 1111111, 2222222.)
Note: Sequentially, 0 occurs before 1, not after 9.
Important:
With its flash key size, the Aegis Secure Key also
has relatively small buttons. For greater ease and
better control of key commands, enter all PINs and
command codes onto the Secure Key's keypad
PRIOR to plugging the device into the USB port for
use. Failure to do so may damage the USB port and
cause the key to not function properly.
1

Battery Note

The Aegis Secure Key has an internal
rechargeable battery with a smart-charging
circuit. For safety, each key ships with a partial
charge. Before initial use, we recommend
plugging the key into a powered USB port for
80 minutes to fully charge the battery. The
battery will automatically charge whenever it is
plugged into a powered USB port, regardless of
its operational mode. In standby mode, the
LED fades in and out slowly to indicate that it's
charging and glows solid
it's fully charged. If the battery is completely
discharged, the key will go through a self-test
(indicated by a RED, GREEN, and
sequence) when plugged into a USB port.
RED
RED
to indicate that
BLUE LED
4