Log In To Is-Ip Device; Step 5: Set Up Client Devices - Aiphone IS SERIES Quik Start Programming Manual

Step 4:
Log in to IS-IP Device (IS-IPMV, IS-IPDV, IS-IPDVF)
IMPORTANT:
If connecting the IS-IP devices to a DHCP network, use the IS_IPSEARCH program found on the CD to identify
the IP addresses of the stations. When not tied to a DHCP network, the units will have the default address of
192.168.0.40. By default, all units have the same address, making it important to hook up and program each
station one at a time.
A. Open a web browser and point the address bar to https://192.168.0.40. If using DHCP, enter the unit's IP address
discovered with the IS_IPSEARCH program and hit [Enter].
Note: ensure that https (for security) is being used in the address bar.
B. A security certificate error message will appear. Click "Continue to this website."
C. Choose preferred language (see Figure 4.1).
D. Log in to the unit using the default administrator ID "aiphone," and default password "aiphone" (see Figure 4.2).
Figure 4.1: Select Language
Step 5:
Set Up Client Devices
A. Select Network setting from the menu on the left.
B. Click the Client unit radio button.
C. Enter the Host unit IP address (This will be the Static IP address assigned to the host unit in Step 6).
D. DHCP is utilized by default. Aiphone recommends assigning a static IP address by clicking the
Static IP Address radio button and entering a unique IP address and Subnet Mask. (see Figure 5.1)
E. Enter a Unit name for the device (This is used for identifying the unit in programming only).
F. Enter the Connection port and the Connection password for the system.
G. Click Temporarily stored to save changes.
H. Select Updating the system from the menu on the left.
H. Repeat Steps 4 & 5 for all client devices, then do Step 4 to log in to the host.
Figure 5.1: Network Setting - Client
4 | IS Series IP Direct System Programming Guide
Figure 4.2: ID and Password
How-To
Video Link