Hunter ceiling fan Owner's Manual page 12

Blades
Insert grommets found in the
bag into the holes in the blades, then
secure each blade to a blade iron with
screws found in the
hardware
hardware bag.
M0042-01 • 01/29/14 • © Hunter Fan Company
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Lightly attach the blade irons to the
motor with the blade iron armature
screws, then securely tighten after both
screws are attached.
12 12
www.HunterFan.com
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
1.888.830.1326