Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
¡ß Do NOT use power sources other than those specified.
¡ß Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
Ultra High Resolution Color Camera
Advertisement
Table of Contents
Related Manuals for CamTron ccd camera
Summary of Contents for CamTron ccd camera
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Table Of Contents
¡á Contents Menu Flow Features ¡á Setup Page Menu Precautions ¤ý LENS ¤ý EXPOSURE Components and Accessories ¤ý White Balance (White Bal.) Overview ¤ý SSDR (Super Dynamic Range) ¤ý BACK LIGHT ¡á Front View ¤ý DNR3 (Super Noise Reduction) ¡á Side View ¤ý... -
Page 3: Features
¡á Features Warning ¡á Ultra High Resolution SSDR (Super Dynamic Range) The camera requires periodic inspection. By adopting a diagonal 6mm(1/3") 410,000 (NTSC) For images with high contrast between bright Contact an authorised technician to carry out the inspection. pixel, 470,000(PAL) pixel SONY CCD, and dark spots from difficult lighting conditions the camera produces clear picture quality with a such as backlighting, this camera selectively... -
Page 4: Precautions
¡á Precautions Do not drop the camera and protect Never keep the camera pointed Do not install the camera in Do not install or use the camera in an it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high. -
Page 5: Components And Accessories
¡á Components and Accessories Overview ¡á Front View ¨ç 1. Ultra High Resolution Day&Night CCD Camera 2. Auto Iris Lens Connector Plug ¨è ¨é 3. C-Mount Adapter ¨ç Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. -
Page 6: Side View
¡á Overview Side View Bottom View ¨ë ¨ê ¨ë Tripod Mounting Bracket Screw Hole ¨ê Auto Iris Lens Connector Used to fix the camera onto a bracket or tripod. Used to connect Auto Iris Lens plug. The screw sizes for this hole are as follows: 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197"... -
Page 7: Rear View
¡á Overview Installation Procedures ¡á ¨ñ Video OUT Port Rear View Video signals are output through this port. Connect this port to the Video IN ¨ð port of a Monitor/DVR. ¨ò Auto iris lens selection switch Used to change between DC or Video depending upon the type of ¨ñ... -
Page 8: Installation Procedures
¡á Installation Procedures Using a C/CS mount lens Before installing a lens, identify whether the lens to be installed is a C-Mount 3. Remove the cover of the Auto Iris Lens connector plug and solder the lens cable to the connector pins of the plug. or CS-Mount. -
Page 9: Connecting To A Monitor
Connect the video output terminal located on the rear of the camera the C-Mount Adapter, turn it clockwise to install it. to the Monitor/DVR. CCD Camera Monitor • Since the connection procedure may differ depending on the type of monitor 2. -
Page 10: Connecting To Power
¡á Installation Procedures Connecting to Power Control via RS-485 Interface Since power specifications differ depending on the model, make sure to check The camera can be controlled by using an external controller equipped with your model name and specifications before connecting power. RS-485 communications. -
Page 11: Setup Page Menu
¡á How to Use the Camera ¡á Menu ¡á Settings Settings can be made using the 5 buttons on the rear of the camera. SETUP menu ¤ýDC ¤ýVIDEO MANUAL LENS (selection) UP button SET button ¤ýAGC ¤ýBRIGHTNESS ¤ýSHUTTER LEFT button EXPOSURE ¤ýSENS-UP ¤ýRETURN... -
Page 12: Lens
¡á How to Use the Camera - Level (VIDEO) : Adjusts the level of video iris signals; the higher the MAIN MENU level is, the brighter the video looks. Select the function using Change the status using 1.LENS the UP or DOWN button. the LEFT or RIGHT button. -
Page 13: White Balance (White Bal.)
¡á How to Use the Camera Note EXPOSURE SETUP • If you press the SET button in 'AUTO' mode, You can adjust brightness 1.BRIGHTNESS by increasing or decreasing the shutter speed. (X2~X512) 2.SHUTTER • Note that the higher the zoom level, the brighter the screen, but the 3.AGC HIGH more likely it is that an after-image will appear. -
Page 14: Ssdr (Super Dynamic Range)
■ How to Use the Camera BACKLIGHT Note • White Balance may not work properly under the following conditions. This camera is designed so that it delivers a distinctive subject and background In this case select the AWC mode. at the same time, even when the subject is in backlight, unlike conventional cameras, by adopting a proprietary W-V DSP chip. -
Page 15: Dnr3 (Super Noise Reduction)
¡á How to Use the Camera HLC MASKING AREA MAIN MENU 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.DNR3 7.DAY/NIGHT COLOR HLC ON HLC OFF ¡Ü OFF : Not being used 2. Select a desired mode using the Left and Right buttons. 3. -
Page 16: Special
¡á How to Use the Camera 2. Select a desired mode using the Left and Right buttons according to the 2. Select a desired mode using the Up and Down buttons. picture display you want. ¡Ü COLOR : The picture is always displayed in color. SPECIAL ¡Ü... - Page 17 ¡á How to Use the Camera CAMERA TITLE SETUP 4) Use the 4 direction buttons to move Note to a desired letter and select the letter • As the DIS function uses the digital zoom the camera's resolution will by pressing the SET button. Repeat decrease.
-
Page 18: Return
¡á How to Use the Camera ¡Ü MOTION DET : 1) When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates 'PRIVACY'. This product has a feature that allows you to observe movement of objects in 8 different 2) Set up the mode using the 4 direction buttons. -
Page 19: Exit
¡á How to Use the Camera Troubleshooting ¡á If you have trouble operating your camera, refer to the following table. ¡Ü LANGUAGE : You can select the menu language according to your If the guidelines do not enable you to solve the problem, contact an requirements. -
Page 20: Troubleshooting
¡á Troubleshooting Specifications (AC24V / DC12V) ¡á ITEM NTSC Problem Solution AC24V / DC12V DC12V AC24V / DC12V DC12V Power Consumption The Motion Detection • Check that MOTION DET in the SPECIAL SETUP 170mA(AC24V)/260mA(DC12V) 160mA 170mA(AC24V)/260mA(DC12V) 160mA is not set to 'OFF'. function does not Image Sensor SONY 1/3"... -
Page 21: Specifications
Specifications (AC230V) ¡á ITEM NTSC AC230V Power Consumption MAX. 4.5W Image Sensor SONY 1/3" Super HAD High Sensitivity Color CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Frequency Hori z ontal : 15.734 KHz, Verti c al : 59.94 Hz Hori z ontal : 15.625 KHz, Verti c al : 50.00 Hz... -
Page 22: Color Camera
Ultra High Resolution Color Camera Instruction Guide Ultra High Resolution Color Camera Printed in KOREA...
Need help?
Do you have a question about the ccd camera and is the answer not in the manual?
Questions and answers