Advertisement

Quick Links

The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
High Resolution Color Dome Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CTCD-536 and is the answer not in the manual?

Questions and answers

Summary of Contents for CamTron CTCD-536

  • Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Page 2: Table Of Contents

    ■ Contents Camera Operation Features ■ Settings Warnings and Precautions ㆍ LENS ㆍ SHUTTER Components ㆍ WHITE BALANCE Names and Functions of Parts ㆍ BLC (Back Light Compensation) ■ Lens ㆍ AGC (Auto Gain Control) ■ OSD ㆍ ADJUST ■ VBS-EXTRA ㆍ...
  • Page 3: Features

    ■ Features Warning ■ The camera requires periodic inspection. Programmable GAMMA Processing Horizontal Resolution of 540 TV Contact an authorised technician to carry out the inspection. Lines Clear image quality has been achieved by Stop using your camera when you find it malfunctioning. employing a SONY CCD with 410,000 (effective) pixels, which provides a If the camera emits smoke or is unusually hot for a long period,...
  • Page 4 ■ Precautions Do not drop the camera and protect Never keep the camera pointed Do not install the camera in Do not install or use the camera in an it from physical shocks. directly at strong light. extreme temperature conditions. environment where the humidity is high.
  • Page 5: Components

    ■ Components Names and Functions of Parts ■ 1. COLOR DOME CAMERA 2. SCREWS 3. WIRE FOR VBS-EXTRA 4. INSTRUCTION GUIDE High Resolution Color Dome Camera High Resolution Color Dome Camera...
  • Page 6: Names And Functions Of Parts

    ■ Names and Functions of Parts Names and Functions of Parts ■ LENS : Vari-Focal DC Auto Iris Lens VBS-EXTRA FOR CONNECTING TO LCD ① ③ Please use the supplied wire when connecting to LCD VBS-EXTRA SMPS PCB FOR DUAL POWER - IF APPLICABLE ④...
  • Page 7: Installation

    ■ Installation 1. Dome Base Mounting - Open the dome cover by loosening the 3 screws using the special wrench provided. - Mount the base of camera to a sturdy surface using the 4 screws (1.5 inch) and the 4 premade holes on the base of the dome. 2.
  • Page 8: Camera Operation

    ■ Camera Operation ■ Menu ■ Settings Settings can be made using the 5 buttons located in the camera. SETUP menu LENS (selection) ㆍMANUAL ㆍDC/VIDEO SHUTTER ㆍFIXED ㆍAUTO ㆍFLK (condition and speed control) ㆍATW ㆍAWB ㆍFIXED WHITE BALANCE control ㆍMANUAL ㆍBLC AREA ㆍBLC RATIO (Back Light Compensation)
  • Page 9 ■ Camera Operation ● DC : Auto Iris Lens selection SETUP Select the desired Modes can be changed LENS menu item by using the LEFT and Note SHUTTER FIXED using the UP and RIGHT buttons. WHITE BAL. DOWN buttons. ㆍThe brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within the range of 0 ~255.
  • Page 10: ㆍ White Balance

    ■ Camera Operation WHITE BALANCE SHUTTER (condition and speed control) Auto or manual control can be selected. The screen colours can be adjusted using the WHITE BALANCE function. 1. When the SETUP menu is on the screen, position the cursor to point to 1.
  • Page 11: ㆍ Blc (Back Light Compensation)

    ■ Camera Operation Note BLC SETUP BLC AREA ㆍUnder the following conditions the WHITE BALANCE function may not operate BLC RATIO properly. In such cases, please select the AWB mode. ① When the object's surroundings have a very high colour temperature RETURN (eg, a clear sky and sunset) ②...
  • Page 12: Camera Id

    ■ Camera Operation ADJUST FUNCTION 1. Position the cursor to point to 'FUNCTION' on the SETUP menu by using the UP and DOWN buttons. SETUP 2. Select the mode required by pressing the LEFT and RIGHT button. LENS MANUAL SHUTTER AUTO FUNCTION WHITE BAL.
  • Page 13: Day & Night

    ■ Camera Operation 3) Press the SET button. Note ㆍWhen the AGC is turned off, COLOR does not operate. ID SETUP CAMERA ID POSITION ● MIRROR - ON : Sets a horizontal image inversion. RETURN - OFF : Cancels the inversion. 4) Up to 15 characters can be used for the camera ID.
  • Page 14: Privacy

    ■ Camera Operation ● PRIVACY ● LANGUAGE Users can set up to 4 areas as privacy zones. 'AREA STATE' allows Users can select their preferred language for the OSD menu from either, users to turn the privacy mode on or off within each designated area. English, Korean, Chinese (Big5), Chinese (Simplified) or Japanese.
  • Page 15: Troubleshooting

    ■ Troubleshooting If there are problems with the camera operation, check the tables below. If Problems Troubleshooting the problem persists, please contact the agent who supplied the product. The MOTION ㆍCheck if 'MOTION DETECTION' mode is DETECTION function is turned on. Problems Troubleshooting not working.
  • Page 16: Specifications

    ■ Specifications MEMO ■ ITEM NTSC AC24V / DC12V DC12V AC24V / DC12V DC12V Power Source 130mA(AC24V)/180mA(DC12V) 90mA 130mA(AC24V)/180mA(DC12V) 90mA Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Size 1/ 3 inch interline transfer CCD Scanning System 2:1 Interlace sync...
  • Page 17 ■ MEMO...
  • Page 18 High Resolution Color Dome Camera Instruction Guide High Resolution Color Dome Camera Printed in KOREA...

Table of Contents