Specifications; Options - Kenwood TK-7160 Brochure & Specs

Options

■
KMC-35
Microphone
(supplied microphone)
■
KMC-36
Keypad Microphone
■
KMC-9C
Control Station
Desktop Microphone
■
KCT-18
Ignition Sense Cable
(requires KCT-39 option)

Specifications

Model TK-7160
GENERAL
Frequency Range 136~174 MHz
Number of Channels
Zone
Channel
Channel Spacing
Wide 25 kHz, 30 kHz
Narrow 12.5 kHz, 15 kHz
Operating Voltage
Current Drain
Standby 0.4 A
Receive 1.0 A
Transmit 8.0 A
Duty Cycle
Operating Temperature Range
Frequency Stability
Antenna Impedance
Channel Frequency Spread 38 MHz
Dimensions (W x H x D),
Projections not included
Weight (net)
FCC ID K4437663110
IC Certification —
* FleetSync ® is not compatible with FleetSync ® II offered in some Kenwood products.
** The 20-pin 160-Series Easy Option Port is a not compatible with the Kenwood 26-pin Easy Option Port connector/options.
The traditional PCB connections are available for wired-in boards not having a 20-pin Easy Option Port connector.
FleetSync ® is a registered trademark of Kenwood Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
®
All other trademarks are property of their respective owners.
Applicable MIL-STD
Standard MIL 810C
Methods/Procedures
Low Pressure 500.1/Procedure I
High Temperature 501.1/Procedure I, II
Low Temperature 502.1/Procedure I
Temperature Shock 503.1/Procedure I
Solar Radiation 505.1/Procedure I
Rain* 506.1/Procedure II
Humidity 507.1/Procedure I, II
Salt Fog 509.1/Procedure I
Dust 510.1/Procedure I
Vibration 514.2/Procedure VIII, X
Shock 516.2/Procedure I, II, III, V
* MILSTD-810 506.X Procedure II "rain drip" specifications are conditional on installed KMC-35/36 microphones and supplied accessory connector covers.
■
KCT-36
3m Extension Cable
(for KCT-39)
■
KCT-39
Connection Cable
■
KAP-2
Horn Alert/Public
Address Relay Unit
■
KES-3
External Speaker
TK-7160H TK-8160 TK-8160H
450~490 MHz
Max.128 per Radio
Max.128 per Zone
25 kHz
12.5 kHz
13.6 V DC±15 %
0.4 A 0.4 A 0.4 A
1.0 A 1.0 A 1.0 A
14.0 A 8.0 A 14.0 A
Transmit: 20 %
-22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
±0.00025 % (-22 ºF ~ +140 ºF)
50 Ω
40 MHz
6-5/16" x 1-11/16" x 5-3/8"
(160 mm x 43 mm x 137 mm)
2.6 lbs. (1.18 kg)
K4437663210 K4437673110 K4437673210
282F-37663210 — 282F-37673210
MIL 810D MIL 810E
Methods/Procedures Methods/Procedures
500.2/Procedure I, II
501.2/Procedure I, II
502.2/Procedure I, II
503.2/Procedure I
505.2/Procedure I
506.2/Procedure II
507.2/Procedure II, III
509.2/Procedure I
510.2/Procedure I
514.3/Procedure I
516.3/Procedure I, IV, V
■
KES-5
External Speaker
(requires KAP-2)
■
KMB-10
Key Lock Adapter
■
KLF-2
Line Noise Filter
■
KPS-10A
DC Power Supply
All accessories and options may not be available in all markets. Contact an authorized
Kenwood dealer for details and complete list of all accessories and options.
Model
RECEIVER
(Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide
Narrow
Selectivity
Wide
Narrow
Intermodulation Distortion
Wide
Narrow
Spurious Response
Audio Output
(4 Ω Impedance)
TRANSMITTER
(Measurements made per EIA/TIA-603)
RF Output Power
Spurious Response
Type of Emission
Wide
Narrow
FM Hum & Noise
Wide
Narrow
Microphone Impedance
Audio Distortion
Wide
Narrow
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
MIL 810F
Methods/Procedures
500.3/Procedure I, II 500.4/Procedure I, II
501.3/Procedure I, II 501.4/Procedure I, II
502.3/Procedure I, II 502.4/Procedure I, II
503.3/Procedure I 503.4/Procedure I, II
505.3/Procedure I 505.4/Procedure I
506.3/Procedure II 506.4/Procedure III
507.3/Procedure II, III 507.4
509.3/Procedure I 509.4
510.3/Procedure I 510.4/Procedure I, III
514.4/Procedure I 514.5/Procedure I
516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
■
KPS-15
DC Power Supply
■
KDS-100
Mobile Data Terminal
(requires KCT-39 option)
■ KGP-2A/2B
GPS Receiver /
Modem Unit
(requires KCT-39 option)
TK-7160 TK-7160H TK-8160
0.28 µV
0.35 µV
75 dB
65 dB
70 dB
60 dB
75 dB
4 W with less than 5 % distortion
5 W / 25 W 25 W / 50 W 5 W / 25 W
70 dB
16K0F3E
11K0F3E
45 dB
40 dB
600 Ω
3 %
5 %
footnotes from front:
DTMF includes PTT ID, Emergency ANI, Manual Encode
1
(KMC-36), Auto-Dial (9 numbers) & Stun.
2 Special Alert Tone Patterns operate for 2-Tone, DTMF, FleetSync
selective call decode.
3 Call Key 1 & 2: operates for 2-Tone, DTMF and FleetSync
status encode.
4 KCT-39 required for 4 CH remote control, ignition sense (KCT-18),
KGP-2A/B, KDS-100, data modems, external GPS interface.
5 KCT-39 & KCT-18 ignition sense cable options required.
KAP-2 required: Horn Alert operates for FleetSync
6
DTMF selective call decode.
7 KPG-99D program software required: Windows
compatible; English/Spanish program screen languages.
FleetSync GPS features require a KCT-39 and an external GPS
8 ®
receiver with NMEA TTL level serial data output; set Port 1 & 2
(Inputs) to "GPS NMEA."
GPS-2A
GPS-2B
TK-8160H
25 W / 45 W
®
®
, 2-Tone or
®
® 98/ NT/2000/ Me/XP
JQA-QMA1205
ADS#44107 Printed in USA