Specifications - Kenwood TH-D72A Service Manual

General
Band A & B
Frequency range
Band A
Band B
Mode
Antenna impedance
Operating temperature range
External power supply (DC IN)
Rated voltage
Battery terminals
Ground method
Frequency stability
Receive with no signals
Battery Saver ON (Single band)
TNC ON with no signals (Single band)
Current Transmit with H, 13.8V (DC IN)
Transmit with H, 7.4V (PB-45L)
Transmit with L, 7.4V (PB-45L)
Transmit with EL, 7.4V (PB-45L)
GPS only mode
1
Dimensions (W x H x D) *
2
Weight *
*1: With Battery pack (PB-45L).
*2: Antenna, Battery pack (PB-45L) and Belt clip included.
Transmitter
RF power output
Modulation
Maximum frequency deviation
Spurious radiation (at high transmit power)
Modulation distortion (300Hz ~ 3kHz)
Microphone impedance

SPECIFICATIONS

TX (VHF) 144 ~ 148MHz
TH-D72A
TX (UHF) 430 ~ 450MHz
TX (VHF) 144 ~ 146MHz
TH-D72E
TX (UHF) 430 ~ 440MHz
RX (VHF) 136 ~ 174MHz
RX (UHF) 410 ~ 470MHz
RX (VHF) 118 ~ 174MHz
RX (UHF) 320 ~ 524MHz
F1D/ F2D/ F3E
50Ω
–20°C ~ +60°C (–4°F ~ +140°F)
with PB-45L –10°C ~ +50°C (+14°F ~ +122°F)
DC 12.0 ~ 16.0V (13.8V nominal)
DC 5.5 ~ 9.0V (7.4V nominal)
Negative
Within ±5ppm (–10°C ~ +50°C)
Single band Approx. 100mA
Dual band Approx. 150mA
Approx. 30mA
Approx. 135mA
Approx. 1.6A
Approx. 2.0A
Approx. 800mA
Approx. 500mA
Approx. 60mA
Projections not included 58 x 121.3 x 33.2 mm (2.28" x 4.78" x 1.31")
Projections included. 58 x 140 x 39.8 mm (2.28" x 5.51" x 1.57")
Approx. 370g (13.1oz)
H 5W/ Approx. 2W (with BT-15)
L Approx. 0.5W
EL Approx. 0.05W
Reactance
FM: ±5kHz, N-FM: ±2.5kHz
Less than –60dB
Less than 3%
2kΩ
TH-D72A/D72E
87