Power On Display - Toshiba Satellite E300 series User Manual

2. Click the OK button. The following message appears, allowing you to
verify the password.
3. If character strings match, the password is registered click OK button. If
they do not match, the following message appears. You must repeat
from step 1.
To delete a user password:
1. Select Not Registered to display the following prompt:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
If they do not match, the following message appears. You must repeat
step 1.
■
If you enter the password incorrectly three times in a row, the computer
need to shut off.
■
You will not be able to access the password option in the HW Setup. In
this case you must turn the power off and back on to retry the
procedure.
4. Follow the same procedures described in the earlier section, How to set
the password, to set a new user password.
Display
This tab allows you to customize your computer's display settings for either
the internal LCD screen or for an external monitor.

Power On Display

Allows you to set the display to be used when the computer is booted.
Auto-Selected
System LCD only
User's Manual
Verify Password:
Entry Error!!!
Enter Password:
Enter Password: ****
Not registered
Incorrect Password.
Selects an external monitor if one is connected,
otherwise, it selects the internal LCD display
(Default).
Selects the internal LCD, even if an external
monitor is connected.
Utilities & Advanced Usage
4-17