Troubleshooting; What Can I Do If I Don’t Know Or Forget My Password? - TP-Link TD-W8951ND Quick Installation Manual

Troubleshooting

T1. How do I restore my Router's configuration to its factory default settings?
With the Router powered on, press
and hold the RESET button on the
rear panel for 8 to 10 seconds
before releasing it.
Press it for 8 to 10 seconds
Once the Router is reset, the current configuration settings will be lost and
Note
you will need to re-configure the Router.
T2. What can I do if I don't know or forget my password?
1) Restore the Router's configuration to its factory default settings. If you don't
know how to do that, please refer to section T1.
2) Use the default user name and password: admin, admin.
3) Try to configure your Router once again by following the instructions in the
previous steps of the QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer's IP Address.
For Windows 7 OS
Go to Start > Settings > Control
Panel, and then you will see the
following page.
Click View network
status and tasks
5