Appendix C: Coaster Brakes - Priority Bicycle Owner's Manual

Appendix C
Coaster Brake
1. How the coaster brake works
The coaster brake is a sealed mechanism which is a part of the bicycle's rear wheel hub. The brake is activated by reversing the
rotation of the pedal cranks (see fig. 5). Start with the pedal cranks in a nearly horizontal position, with the front pedal in about the 4
o'clock position, and apply downward foot pressure on the pedal that is to the rear. About 1/8 turn rotation will activate the brake. The
more downward pressure you apply, the more braking force, up to the point where the rear wheel stops rotating and begins to skid.
WARNING: Before riding, make sure that the brake is working properly. If it is not working properly, have the bicycle
checked by your dealer before you ride it.
WARNING: If your bike has only a coaster brake, ride conservatively. A single rear brake does not have the stopping
power of front-and-rear brake systems.
2. Adjusting your coaster brake
Coaster brake service and adjustment requires special tools and special knowledge. Do not attempt to disassemble or service your
coaster brake. Take the bicycle to your dealer for coaster brake service.
Page 48