Wiring Connection - Kenwood KDC-BT34U Instruction Manual

Wiring connection

Antenna terminal
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
Gray ]
B3
: Front speaker (right)
Gray/black [
B4
White ]
B5
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
Green/black [
B8
Rear/subwoofer output
Yellow (Battery wire)
Ignition wire
Red (Ignition wire)
(Red)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
Fuse (10 A)
Microphone input jack ( 8)
If no connections are made, do not let the
wire come out from the tab.
STEERING WHEEL
Light blue/yellow
REMOTE INPUT
(Steering remote
REMOTE CONT
control wire)
Blue/White ANT CONT
(Power control
P. CONT
wire/ Antenna
control wire)
Brown
(Mute control wire)
MUTE
ISO connectors
Part list for
installation
(A) Faceplate
(B) Trim plate
To the steering wheel
remote control adapter
(C) Mounting sleeve
To the power control
terminal when using the
optional power amplifier,
or to the antenna control
(D) Wiring harness
terminal in the vehicle.
To connect the Kenwood
navigation system, consult
your navigation manual.
(E) Extraction key
ENGLISH | 19