Related Manuals for Kenwood KDC-BT34U
Summary of Contents for Kenwood KDC-BT34U
- Page 1 KDC-BT34U CD-RECEIVER INSTRUCTION MANUAL CD-RECEIVER BEDIENUNGSANLEITUNG CD-PECИBEP ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ © 2013 JVC KENWOOD Corporation GET0998-001B (EN)
- Page 2 For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. For Turkey Old electrical and electronic equipment and batteries should be recycled at a facility capable of Bu ürün 28300 sayılı...
- Page 3 • Android is trademark of Google Inc. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
-
Page 4: Table Of Contents
CONTENTS BEFORE USE Warning BEFORE USE Do not operate any function that takes your attention away from safe driving. BASICS Caution Volume setting: GETTING STARTED • Adjust the volume so that you can hear sounds outside the car to prevent accidents. •... -
Page 5: Basics
BASICS Faceplate Attach Detach Volume knob (turn/press) Loading slot Display window How to reset Your preset adjustments will also be erased. Detach button Do this (on the faceplate) Press B SRC. Turn on the power • Press and hold to turn off the power. Adjust the volume Turn the volume knob. -
Page 6: Getting Started
GETTING STARTED While in clock display screen... Press and hold DISP SCRL to enter clock adjustment mode directly. Then, perform step to set the clock. Set the initial settings Press B SRC to enter STANDBY. Press the volume knob to enter [FUNCTION]. Select the display language and cancel the demonstration Turn the volume knob to make a selection (see the following table), then press the knob. -
Page 7: Radio
Press the volume knob to enter [FUNCTION]. firmware, see: AF SET ON: Automatically searches for another Turn the volume knob to make a selection www.kenwood.com/cs/ce/ station broadcasting the same program in (see the following table), then press the the same Radio Data System network with knob. -
Page 8: Aux
CD / USB / iPod RADIO Preparation: Start playback PTY SEARCH Press the volume knob to enter PTY Select [ON] for [BUILT-IN AUX]. ( 4) language selection. Turn the volume knob The source changes automatically and playback to select the PTY language (ENGLISH/ Start listening starts. - Page 9 • MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, • To cancel, press and hold REPEAT OFF • KENWOOD Music Editor Light (KME Light)/ KENWOOD Music If you have many files..Control (KMC) file ( 14): FILE REPEAT, REPEAT OFF You can search through them quickly (on step Random play * Press 3 ...
-
Page 10: Bluetooth
BLUETOOTH® CD / USB / iPod Turn the volume knob to make a selection, You can operate Bluetooth devices using this Select a song by name unit. then press the knob. While listening to iPod... 0.5% (default)/ 1%/ 5%/ 10%: Skip search Press ratio over the total files. - Page 11 BLUETOOTH® Operate the Bluetooth device to confirm pairing. Pair a Bluetooth device “TESTING” flashes on the display. When connecting a Bluetooth device to the unit for the first time, The connectivity result (OK or NG) appears after the test. perform pairing between the unit and the device. Once the pairing is PAIRING: Pairing status completed, the Bluetooth device will remain registered in the unit even if HF CNT:...
- Page 12 BLUETOOTH® Improve the sound quality during a call Bluetooth mode operations While talking on the phone... Press to enter Bluetooth mode. Press the volume knob to enter [FUNCTION]. Turn the volume knob to make a selection (see the following table), Turn the volume knob to make a selection (see the following table), then press the knob.
- Page 13 BLUETOOTH® Turn the volume knob to select a name, then press the knob. BATT* LOW/ MID/ FULL: Shows the strength of the battery. Turn the volume knob to select a phone number, then press the SIGNAL* NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current knob to call.
- Page 14 BLUETOOTH® Bluetooth audio player Turn the volume knob to select a contact. DVC PRIORITY Selects a device to be connected as If a contact is selected, press the volume Operations and display indications may differ priority device. knob to show the phone number. according to their availability on the connected “...
-
Page 15: Audio Settings
AUDIO SETTINGS While listening to any source... PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ Press the volume knob to enter [FUNCTION]. NATURAL/ USER: Selects a preset equalizer suitable to the music Turn the volume knob to select [AUDIO CONTROL], then press the genre. -
Page 16: Display Settings
• Discs with coloring on the recording surface or discs that only once. ; OFF: Cancels. • You cannot operate iPod if “KENWOOD” or “ ” is displayed are dirty. on iPod. • Recordable/ReWritable discs that have not been finalized. -
Page 17: Troubleshooting
TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. “COPY PRO” appears. A copy-protected file is played. • Check the cords and connections. “NA DEVICE” appears. Connect a supported USB device, and check the connections. “PROTECT”... -
Page 18: Specifications
SPECIFICATIONS TROUBLESHOOTING Symptom Remedy FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Phone sound quality is • Reduce the distance between the unit and the Usable Sensitivity (S/N = 26 dB) 0.71 μV/75 Ω poor. Bluetooth device. Quieting Sensitivity 2.0 μV/75 Ω • Move the car to a place where you can get a better (DIN S/N = 46 dB) signal reception. - Page 19 SPECIFICATIONS USB Standard USB 1.1, USB 2.0 (Full speed) Frequency Response (±3 dB) 20 Hz — 20 kHz File System FAT12/16/ 32 Input Maximum Voltage 1 200 mV Maximum Supply Current DC 5 V 1 A Input Impedance 30 kΩ MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Operating Voltage 14.4 V (10.5 V — 16 V allowable) WMA Decode Compliant with Windows Media Audio Maximum Current Consumption 10 A...
- Page 20 Warning Installing the unit (in-dash mounting) • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.
-
Page 21: Wiring Connection
Antenna terminal in the vehicle. Color and function control wire) Yellow : Battery Blue/White : Power control To connect the Kenwood Brown : Ignition (ACC) navigation system, consult (Mute control wire) MUTE your navigation manual. Black : Earth (ground) connection...