Kenwood KDC-BT34U Instruction Manual page 14

BLUETOOTH®
3
Turn the volume knob to select a contact.
If a contact is selected, press the volume
knob to show the phone number.
4
Press and hold the volume knob to enter
delete mode.
5 Turn the volume knob to select [DELETE ONE]
or [DELETE ALL], then press the knob.
DELETE ONE: Selected name or phone number
in step 3 is deleted.
DELETE ALL: All names or phone numbers
from the selected menu in step 2 is deleted.
6 Turn the volume knob to select [YES] or
[NO], then press the knob.
Bluetooth mode settings
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [BT MODE],
then press the knob.
3 Turn the volume knob to make a selection
(see the following table), then press the
knob.
4 Press and hold to exit.
To return to the previous setting item or
hierarchy, press .
PHONE SELECT Selects the phone or audio device to
connect or disconnect.
AUDIO SELECT
" " appears in front of the device name.
1 Turn the volume knob to select a
DEVICE DELETE
device to delete, then press the
knob.
2 Turn the volume knob to select [YES]
or [NO], then press the knob.
12
DVC PRIORITY
*
TRANSFER PB
PIN CODE EDIT
(0000)
RECONNECT
AUTO PAIRING
Default: XX
BT HF/AUDIO
INITIALIZE
Selects a device to be connected as
priority device.
" " appears in front of the device name
set as priority.
"DL PB " appear and transfer the
phonebook of the connected phone to
this unit manually.
* Selectable only when the connected
phone supports OPP.
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a
number.
2 Press S / T to move the entry
position.
1 2
Repeat steps and until you finish
entering the PIN code.
3 Press the volume knob to confirm.
ON: The unit automatically reconnect
when the Bluetooth device is within
range. ; OFF: Cancels.
ON: The unit automatically pair
supported Bluetooth device (iPhone/
iPod touch) when it is connected
through USB input terminal. Depending
on the iOS version of the connected
iPhone/iPod touch, this function may
not work. ; OFF: Cancels.
FRONT: Ouputs audio from the front left
and right speakers. ; ALL: Outputs audio
from all the speakers.
YES: Initializes all the Bluetooth settings
(including stored pairing, phonebook,
and etc.). ; NO: Cancels.
Bluetooth audio player
Operations and display indications may differ
according to their availability on the connected
device.
To Do this
Playback 1 Press B SRC to select
BT AUDIO.
2 Operate the Bluetooth
audio player to start
playback.
Pause or Press 6 IW.
resume
playback
Select group or Press J / K.
folder
Reverse/ Press S / T.
forward skip
Reverse/fast- Press and hold S / T.
forward
Repeat play Press 4
make a selection.
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Random play
Press 3
make a selection.
FOLDER RANDOM,
RANDOM OFF
Press and hold 3
select "ALL RANDOM."
repeatedly to
repeatedly to
to