Overview Defining the VP-426 HDMI-PC Scaler Connecting the VP-426 Connecting the Remote Terminal Block Operating the VP-426 Operating the VP-426 from the Front Panel Buttons Using the OSD Input Resolutions and Refresh Rate Technical Specifications Figures Figure 1: VP-426 HDMI-PC Scaler...
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Products. Congratulations on purchasing your Kramer VP-426 HDMI-PC Scaler, which is ideal for the following typical applications: ...
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer VP-426 away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview The Kramer VP-426 is a high-performance digital scaler for computer graphics/HDTV and HDMI signals. The unit up- or down-scales computer graphics and HDTV signals to resolutions up to WUXGA and 1080p. 22 output resolutions and Native are supported. The user can choose the input – computer graphics/HDTV or HDMI –...
Figure 1: VP-426 HDMI-PC Scaler Feature Function ON LED Lights green when the unit is powered on INPUT Button Press to toggle the input between HDMI and PC HDMI LED Lights when the HDMI input is selected PC LED Lights when the PC input is selected...
Connecting the VP-426 Always switch off the power to each device before connecting it to your VP-426. After connecting your VP-426, connect its power and then switch on the power to each device. To connect the VP-426 as illustrated in the example in Figure 1.
Figure 2: Connecting the VP-426 HDMI-PC Scaler Connecting the Remote Terminal Block The contact closure remote control pins operate in a similar way to the INPUT SELECT button. Using the contact closure remote control (also known as push-to- make momentary contact) you can select the PC or the HDMI input. To do so,...
Operating the VP-426 The VP-426 is operated directly using the front panel buttons and the OSD menu (see Section 5.2). Operating the VP-426 from the Front Panel Buttons During normal operation (without the OSD), the front panel buttons perform the following functions: ...
Page 13
Green 0-100 Blue 0-100 Exit Select to exit to the Main Menu Input Source PC/YPbPr Select for PC source HDMI Select for HDMI source Exit Select to exit to the Main Menu VP-426 - Operating the VP-426...
Page 14
ON - the information is shown permanently OFF - the information is not shown INFO - the information is shown for the time period set in INFO Exit Select to exit to the Main Menu VP-426 - Operating the VP-426...
Page 15
Output Version Factory Reset Resets the device to its factory default parameters and automatically senses the input and output devices Exit Select to exit to the Main Menu Exit Select to exit the OSD VP-426 - Operating the VP-426...
10% to 90%, RHL non-condensing 18.8cm x 11.4cm x 2.5cm (7.4” x 4.5” x 1.0”) W, D, H DIMENSIONS: WEIGHT: 0.45kg (1.0lb) INCLUDED ACCESSORIES: Power supply RK-T2B 19” rack adapter OPTIONS: Specifications are subject to change without notice at http://www.kramerelectronics.com VP-426 - Technical Specifications...
Page 19
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the VP-426 and is the answer not in the manual?
Questions and answers