Defining the VM-12HDCP 1:12 DVI Distributor Installing in a Rack Connecting the VM-12HDCP Acquiring the EDID Simple Operation State Normal Operation State Technical Specifications Figures Figure 1: VM-12HDCP 1:12 DVI Distributor Front Panel Figure 2: Connecting the VM-12HDCP 1:12 DVI Distributor VM-12HDCP – Contents...
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our...
Achieving the Best Performance To achieve the best performance: Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) ...
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
HDCP compliance Support for HDMI Compressed Audio Channels Kramer Equalization & re-Klocking™ Technology that rebuilds the digital signal to travel longer distances I-EDIDPro™ Kramer Intelligent EDID Processing™, an intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems ...
Figure 1: VM-12HDCP 1:12 DVI Distributor Front Panel Feature Function POWER Switch Illuminated switch for turning the unit ON or OFF EDID READ Button Press to read the EDID of the selected display SELECT Button Select the desired display for EDID information OUTPUT STATUS LEDs (from 1 to 12) LEDs light when an output(s) is connected and active;...
Always switch off the power to each device before connecting it to your VM-12HDCP. After connecting your VM-12HDCP, connect its power and then switch on the power to each device. To connect the VM-12HDCP as illustrated in the example in Figure 2, do the following: 1.
Acquiring the EDID The VM-12HDCP initially operates with the default EDID. This means that you can turn ON the power before connecting any of the acceptors or the source. This section describes the two EDID operation states: Simple (see Section 6.1)
Page 13
1. Press the SELECT button several times until the OUTPUT LEDs flash simultaneously. 2. Press the READ button. The READ button illuminates. The default EDID is stored in the non-volatile memory when the READ button no longer illuminates as well as the output LEDs. VM-12HDCP - Acquiring the EDID...
HUMIDITY: 10% to 90%, RHL non-condensing DIMENSIONS: 19" x 7" x 1U (W, D, H) rack mountable WEIGHT: 2.5kg (5.5lbs) approx. INCLUDED ACCESSORIES: Power cord, rack "ears" Specifications are subject to change without notice at http://www.kramerelectronics.com VM-12HDCP - Technical Specifications...
Page 16
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the VM-12HDCP and is the answer not in the manual?
Questions and answers