Kenwood TH-78A Instruction Manual page 68

Switching speaker output when a external
Turn CLOCK function on or off
Turn switch on timerfunction on or off
Turn switch off timerfunction on or off
Activate memory channel lock out function
Turn KEY LOCK function on or off
Turn TX STOP function on or off
Select transmit output power level
Activate duplex operation
Turn reverse function on or off
Return the encoder to the original setting
mode
Recalling stored DTMF cords
Turn automatic power off function on or off
Turn battery saver function on or off
Signaling squelch function on or off
Message memory recall
F then 7
Activate paging code selection mode
F then 8
Activate DTSS code selection mode
F then 9
F then 0
Activate frequency step selection mode
F then M
Recall lower limit frequency of programmable
2
F then f
band scan
F then TONE
Recall upper limit frequency of programmable
band scan
F then DUAL
Change the speaker output when a external
F then SHIFT
speaker is connected
F (1 second)
Activate Time setting function
then E.CHG
F (1 second)
Switch-on timer setting mode
then MHz
F (1 second)
Switch-off timer setting mode
then VFO
F (1 second)
Select tone frequency
then MR
F (1 second)
then CALL
TO DO THIS
PRESS
F (1 second)
then MSG
F (1 second)
then 1
F (1 second)
then 2
F (1 second)
then 3
F (1 second)
then 4
F (1 second)
then 5
F (1 second)
then 6
F (1 second)
then 7
F (1 second)
then 8
F (1 second)
then 9
F (1 second)
then TONE
A