Table of Contents
Advertisement
2. Attach the keyboard and ensure that the keyboard edges are under the frame.
3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs
and slide the keyboard toward you until the keyboard is in place.
4. Secure the keyboard by tightening the screws from the bottom side of the computer.
1120 Keyboard bezel assembly, card reader, touch pad, and dummy cap
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 58
•
"1020 Large bottom cover" on page 59
•
"1040 Optical drive or blank bezel" on page 60
•
"1060 Hard disk drive assembly" on page 62
•
"1110 Keyboard" on page 69
72
Hardware Maintenance Manual
Advertisement
Table of Contents
