Get Started; Insert The Sim Card And Battery; Remove The Sim Card; Charge The Battery - Nokia 1661 User Manual

Hide thumbs Also See for 1661:
Table of Contents

Advertisement

Available languages

Available languages

Get started

Insert the SIM card and battery

This phone is intended for use with the BL-4C battery.
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
1
Slide the back cover downwards (1), and remove it.
2
Lift the battery, and remove it (2).
3
Insert the SIM card (3). Ensure that the gold-coloured contact area is facing down
and the bevelled corner of the SIM card is slid in next.
4
Replace the battery and back cover (4, 5).

Remove the SIM card

Press the release spring (1), and slide out the SIM card (2).

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1
Connect the charger to a wall outlet.
2
Connect the charger to the device.
3
When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
4
© 2009 Nokia. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents