Maytag Dishwasher User Manual page 5

Upper Rack
The upper rack of your dishwasher is designed
with flexibility in mind. Glasses, cups, small
plates, bowls, pans, etc. can be loaded in many
different positions to suit your needs.
The rack is designed so dishes can be centered
behind a single tine and held in place by the
rack's support wires. Dishes can also be loaded at
an angle to maximize space.
The upper rack may be removed if desired.
Push inward on the front of tile rack rail ends to
unsnap. Remove rail ends and pull out rack.
To replace rack: reinsert rack, place rail ends in
position and snap fronts into place by pushing
outward.
The hinged shelf can be used to stack two levels
of cups, juice glasses, and other short items. Lower Rack
Load small diameter items under shelf so Large dinner plates and other dishes may be
water will reach upper tier. When the shelf is placed in any convenient location in the lower
folded up, this area can be used for taller glasses, rack but soiled surfaces should face the
stemware, etc. center.
When loading glassware, leave a small space Tall items such as bakeware and large platters
between each piece so they do not touch each should be loaded on the left side of this rack.
other during the wash cycle. Do not place Thin items (cookie sheets, pizza pans, etc.) may
glasses over the tines, be placed behind the folding shelf. With the
PAGE 4