Table of Contents
Advertisement
3.
DC Power Supply
Model:
Nominal Output Voltage:
Input Voltage Range:
110/220 VAC power supply - if need to convert the power supply from 220VAC to 110VAC,
please detached the 110/220VAC panel at the rear panel of the unit and short the A and B terminals.
The ON/OFF switch on the front panel of the unit, enables to turn the power supply output on and
off.
Note that, when the dc output power supply is on OFF mode, the internal power supply fans still
work.
4.
Junction Box
The junction box enables the connection of up to four external devices simultaneously, in addition to
headphone, to the accessory port of the MICOM – 2 (e.g. modem, phone patch.)
Potentiometers adjust - Potentiometers are used to adjust the received audio levels (one of each
connector). Each potentiometer is associated with a connector as follows:
ACC. -J1:
RX1
ACC. -J2:
RX2
ACC. -J3:
RX3
ACC. -J4:
RX4
The potentiometers are located on the rear panel of the MICOM-500E.
For more details see Service Manual 68P02952C55
EWS1500-15
28V-50A----14V-30A
85~132 VAC / 170~265 VAC (Auto Selectable), 47~63 Hz
7
HF-SSB Micom – 500E-A
Hide quick links:
Advertisement
Table of Contents
