Desk-Top Installation - Sherwood WA-240 Operating Instructions Manual

DESK-TOP INSTALLATION

Align the desk-top holes of the main unit
1
stand and the holes of the desk-top stand as
illustrated.
In the same manner, attach the desk-top stand to the speaker stand with
3
the supplied screws.
Insert the main unit bracket into the groove
4
of the main unit stand and slide it in place.
Install this system firmly on a flat and stable
6
surface.
COMPACT
D IGITAL AUDIO
DOLBY B NR
Speaker cord
Speaker cord
POWER
ON/OFF
INPUT VOLUME
TUNING/
PRESET FM MODE SURROUND
CD DECK
CD
DECK
7
Turn the supplied screws clockwise to attach
2
the desk-top stand.
In the same manner, insert the speaker
5
bracket into the groove of the speaker stand
and slide it in place.
Connect the corresponding components to
7
the main unit.(Refer to "System
Connections" on page 10.)
Arrange the connection cords properly.
You can arrange the connection cords by passing
them into the space between the main unit and the
main unit stand.
The double-sided tape(supplied) may be used to
hold the speaker wire in place.