Before Operations; Setting The Clock - Sherwood WA-240 Operating Instructions Manual

Before Operations

SETTING THE CLOCK

Press the "CLOCK" button for more than 3
1
seconds.
Example) When it is 1:15 P.M.
Press the MEMO/SET button to
3
memorize.
Press the "MEMO/SET" button to
5
memorize.
The clock starts from "00" second.
The clock will not operate if the minutes are not
memorized.
If the electricity fails or the AC input cord of this
system is left unplugged for more than 1.5 seconds,
set the clock again.
POWER
INPUT SURROUND T/P MODE MEMO/SET
MUTE VOLUME
DECK
CD SYN REV MODE NR
CD REPEAT INTRO RANDOM
1/ALL A B
TIME EDIT T.SIZE PROG/REV
CLOCK
SLEEP TIMER CLOCK
WA-240
POWER
INPUT SURROUND T/P MODE MEMO/SET MEMO/SET
MUTE VOLUME
DECK
CD SYN REV MODE NR
CD
REPEAT INTRO RANDOM
1/ALL A B
TIME EDIT T.SIZE PROG/REV
SLEEP TIMER CLOCK
WA-240
POWER
INPUT SURROUND T/P MODE MEMO/SET MEMO/SET
MUTE VOLUME
DECK
CD SYN REV MODE NR
CD REPEAT INTRO RANDOM
1/ALL A B
TIME EDIT T.SIZE PROG/REV
SLEEP TIMER CLOCK
WA-240
Set the hour.
2
POWER
INPUT
DECK
CD
The time is displayed in the 12-hour mode.
In the standby mode, each time the "CLOCK"
button is pressed, the clock display mode changes as
follows; 12-hour mode
Set the minutes.
4
POWER
INPUT SURROUND
MUTE
DECK
CD
REPEAT
1/ALL
TIME
SLEEP
when checking the time while
displaying other functions
Press the "CLOCK" button.
POWER
INPUT
MUTE
DECK
CD
1/ALL
TIME
SLEEP
The time display shows for 3 seconds then the
previous display shows.
In the standby mode, the time display is lit dimly.
14
SURROUND T/P MODE MEMO/SET
VOLUME
MUTE VOLUME
CD SYN REV MODE NR
REPEAT INTRO RANDOM
1/ALL A B
TIME EDIT T.SIZE PROG/REV
SLEEP TIMER CLOCK
WA-240
24-hour mode
T/P MODE MEMO/SET
VOLUME
VOLUME
CD SYN REV MODE NR
INTRO RANDOM
A B
EDIT T.SIZE PROG/REV
TIMER CLOCK
WA-240
SURROUND T/P MODE MEMO/SET
VOLUME
CD SYN REV MODE NR
REPEAT INTRO RANDOM
A B
EDIT T.SIZE PROG/REV
CLOCK
TIMER CLOCK
WA-240