Introduction; Unpacking And Installation - Sherwood WA-240 Operating Instructions Manual

Introduction

UNPACKING AND INSTALLATION

Congratulations on Your Purchase!
Your new stylish personal audio system is designed to deliver
maximum enjoyment and years of trouble free service.
Please take a few monments to read this manual thoroughly.
It will explain the features and operation of your system and
help ensure a trouble free installation.
Please unpack your system carefully. We recommend that
you save the carton and packing material. They will be
helpful if you ever need to move your system and may be
required if you ever need to return it for service. Your system
is designed to be placed in a horizontal or vertical position.
To avoid early damage, never place the system near radiators,
in front of heating vents, in direct sunlight, or in excessively
humid or dusty locations. Connect your complementary
components as illustrated in the following section.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
FOR U.S.A.
Note to CATV System Installer
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
FCC INFORMATION
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
CLASS 1
LASER PRODUCT
CAUTION
Invisible laser radiation when the unit is open. Do not
stare into beam.
CAUTION:USE OF ANY CONTROLS, ADJUSTMENTS,OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
2