Meridian DSP3200 User Manual page 36

32
Configuring the DSP
loudspeakers
To specify the ambient temperature for
thermal protection
The DSP 7200 drive units are protected from
overheating by thermal protection software. This is
already configured correctly for most domestic listening
environments, but if the ambient temperature is greater
than 24°C (75°F) you should adjust the ambient
temperature setting.
• Press > or < until the display shows the current
ambient temperature setting.
For example:
• Press A or V to specify the ambient temperature.
When thermal protection is active the lower left green
indicator will be illuminated.
Temp 24