18
Connecting up the
DSP loudspeakers
To connect to a Meridian product using SpeakerLink (daisy chain)
Front R – Slave
SPEAKERLINK
INPUT OUTPUT
You can create a complete system by connecting a pair
of DSP loudspeakers directly to a digital source. The
DSP loudspeakers include volume, balance, and tone
controls allowing you to control the system using an
MSR+.
If the Meridian source or control unit includes a
Meridian SpeakerLink output, such as the Meridian
808 Signature Reference CD Player, you can make all
the connections using SpeakerLink leads. The Meridian
SpeakerLink connection provides both two-channel
digital audio and Meridian Comms control.
This is an alternative to the "home run" wiring
configuration shown in the previous section.
•
Connect the upper SpeakerLink output from the
Meridian product to the SpeakerLink input on the
DSP loudspeaker chosen as the Master, using a
SpeakerLink lead.
•
Connect the SpeakerLink output from the Master
DSP loudspeaker to the SpeakerLink input on the
other (Slave) DSP loudspeaker, using a second
SpeakerLink lead.
MERIDIAN
SpeakerLink lead
808 Signature Reference CD Player
MERIDIAN
SPEAKERLINK
•
Configure the Master DSP loudspeaker as M.RJ45
and the Slave DSP loudspeaker as S.RJ45; see To
choose Master or Slave and the primary connector ,
page 28.
Front L – Master
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
SpeakerLink lead