Miele KM 6325-1 Operating And Installation Instructions page 37

Problem
 is flashing in the
display of one or
more cooking
zones.
The rotary control is not
at "0", a power level has
been set for the cook‐
ing zone. The cooking
zone is not heating up.
 appears in the display
or flashes alternately
with .
 flashes in the dis‐
play alternating
with numbers.
Cause and remedy
The rotary control for the cooking zone has been
turned to the point of resistance clockwise or anti-
clockwise for longer than 30 seconds.
 Turn the rotary control to 0. If the fault message
does not go out, there could be a technical fault.
Call Miele.
There was an interruption to the power supply during
operation.
The cooking zone was switched on more than 3 mi‐
nutes ago without a suitable pan being placed on it.
The maximum operating time for the cooking zone
has been exceeded.
 Turn the rotary control to 0.
The cooking zone can now be used again.
There is an electronic unit fault.
 Interrupt the power supply to the hob for approx. 1
minute. If the problem persists after power is re‐
stored, please contact Miele.
Problem solving guide
37