Basic Operation Of Remote Control Unit - Kenwood KRF-X7775D User Manual

Setting Up Remote Control Unit
Remote Control unit is a new type of remote control unit
which receives information from the receiver and display it
on the LCD screen.
This section describes the basic operations of Remote Con-
trol unit.
Turning power on:
To turn the receiver on: Press the SYS.POWER button.
To turn the connected device on: Press the AV POWER but-
ton.
(It is necessary to perform the procedure in "Identifying
Components for Remote Control Unit" on page 39 to en-
able remote control of AV devices.)
Selecting the input:
Audio device: Press the button repeatedly. The in-
MUSIC
put names where audio devices are identi-
fied by Remote Control unit will be shown
on the LCD screen.
1CD1 :
2MD/Tape1 :
3Tuner :
4CD-R :
5Phono :
If an audio device which is connected to an
input is not identified by Remote Control
unit, the device name is skipped and not dis-
played.
Video device: Press the button repeatedly. The input
MOVIE
names where video devices are identified by
Remote Control unit will be shown on the
LCD screen.
1Video1 :
2Video2 :
3Video3 :
5DVD/6ch :
6AV AUX :

Basic Operation of Remote Control Unit

If a video device which is connected to an in-
put is not identified by Remote Control unit,
the device name is skipped and not displayed.
Although VIDEO4 is displayed in the initial
status, the receiver cannot be switched to se-
lect VIDEO4. The VIDEO4 display will not
appear after the Remote Control unit has been
set up.
TV: Press the button. The LCD screen shows TV if
TV
this is registered in and identified by Remote Control
unit.
Adjusting the receiver's volume:
Press the VOL. (+/-) button repeatedly un-
til the desired volume is obtained.
Muting audio temporarily:
Press the MUTE button.
To resume the original volume, press the MUTE button again
or press one of the VOL. (+/-) buttons.
Using the numeric buttons:
When entering a figure directly for selecting a CD track num-
ber, etc., press the numeric buttons as shown below.
To enter 5 :
To enter 25 :
or
:
2
The button to be pressed varies depending on the
function.
Screen menu control operation
2WAY LCD REMOTE CONTROL UNIT
01.IR
02.Surround
03.Contrast
Home Enter
+
VOL.
LCD LCD
VOL.
-
Function
Function
button 1
button 2
The contents of the func-
tion buttons vary according
to current situations, and
the function names (Next,
Back, Enter, etc.) are shown
on the screen.
For details, see the descrip-
tion of each control opera-
tion.
REC REC
35
Press to select an item by
scrolling the screen menu
up or down.
The selected item is dis-
played in an inverted color.