Kenwood KRF-X7775D User Manual page 144

Chapter Five : Specifications
Digital Audio Section
Sampling Frequency ............. 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input Level / Impedance / Wavelength
Optical ........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial ............................................................ 0.5 Vp-p / 75
Output Level / Impedance / Wavelength
Optical ........................ -15 dBm ~ -21 dBm, 660 nm +30 nm
Video Section
Video Inputs / Outputs
Video (composite) ............................................. 1 Vp-p / 75
S Video ( luminance signal) .............................. 1 Vp-p / 75
(chrominance signal) .................. 0.286 Vp-p / 75
Component (luminance signal) ....................... 1 Vp-p / 75
(Cb/Cr-signal) ............................ ±0.350 Vp-p / 75
FM Tuner Section
Tuning Frequency Range ........................... 87.5 MHz ~ 108 MHz
Usable Sensitivity (Mono)
.................... 1.3 V (75 ) / 13.2 dBf (75 kHz dev., sinad 30 dB)
50
50dB Quieting Sensitivity
Stereo .............................................. 25.1 V (75
Total Harmonic Distortion (1 kHz)
Mono ................................................... 0.3 % (71.2 dBf input)
Stereo ................................................... 0.5 % (71.2 dBf input)
Signal to Noise Ratio (1 kHz, 75 kHz DEV.)
Mono ................................................... 75 dB (71.2 dBf input)
Stereo .................................................... 70 dB (71.2 dBf input)
Stereo Separation (1 kHz) ................................................. 40 dB
Selectivity (+400 kHz) ....................................................... 50 dB
Frequency Response ................ 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
AM Tuner Section
Tuning Frequency Range
9kHz step ............................................... 531 kHz ~ 1,602 kHz
10kHz step ............................................. 530 kHz ~ 1,610 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
........................................................................... 16 V / (500 V/m)
Signal to Noise Ratio (30 % mod. 1 mV input) ............... 50 dB
IR Receiver In Terminal
Maximum Output Current ............................................ 20 mA
Operating Voltage .............................................................. 12 V
Output Impedance .......................................................... 470
IR Out LCD Remote Terminal
Maximum Output Current ............................................ 20 mA
Operating Voltage ................................................................ 5 V
Output Impedance .......................................................... 470
SHAPE OF PLUG TO BE CONNECTED:
IR Receiver In and IR Out
LCD Remote
Stereo mini plug
Sleeve
Tip
Ring
IR IN/OUT SPECIFICATION:
) / 39.2 dBf
IR Receiver In
To Tip Signal
To Ring Ground
To Sleeve +12V
General
Power consumption .......................................................... 500 W
AC outlet
Switched ................................................... 2 (total 90 W max.)
Dimensions .................................................................. W : 440mm
Weight (Net) ..................................................................... 16.8 kg
General
Power consumption .......................................................... 500 W
AC outlet
Switched (except for Australia) .............. 2 (total 90 W max.)
Switched (for Australia) .......................... 1 (total 90 W max.)
Dimensions .................................................................. W : 480mm
Weight (Net) ..................................................................... 16.8 kg
DVD Control
Mono mini plug
Sleeve
Kenwood follows a policy of continuous advancements in
Tip
development. For this reason, specifications may be changed
without notice.
Full performance may not be exhibited in extremely cold
locations (below 0 deg. C).
Terminal
IR Out LCD
Remote
Signal
Ground
H : 191mm
D : 416mm
H : 191mm
D : 416mm