Miele WDA 110 Operating Instructions Manual page 29

Washing machines
Hide thumbs Also See for WDA 110:
Table of Contents

Advertisement

 = Low water level
 = Medium water level
 = High water level
= Intensive rhythm
= Normal rhythm
= Gentle rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
= Not carried out
The washing machine has fully elec‐
tronic controls with automatic load rec‐
ognition. It takes in the right amount of
water required for the programme de‐
pending on the amount of laundry and
its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load. Extra op‐
tions which can be selected have not
been taken into account.
Programme sequence
Special features in the pro‐
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
1)
A second rinse is carried out when a
temperature of 60°C and above has
been selected. A third rinse is carried
out when a temperature below 60°C
is selected.
2)
A third or fourth rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
–  is selected
3)
A third rinse is carried out if:
–  is selected
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wda 210Wda 100Wda 200Tx2070Wda 110 wcs

Table of Contents