Spinning - Miele WDA 110 Operating Instructions Manual

Spinning

Final spin speed
Programme
Cottons
Minimum iron
Automatic plus
Dark garments / Denim
Express 20
Shirts
Woollens 
Delicates
Drain / Spin
Separate rinse / Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Tip: For programmes with a maximum
spin speed not shown on the control
panel, the nearest spin speed above it
will light up. However, to protect the
laundry the machine will only spin at
the spin speed quoted in the chart.
24
Rinse and interim spin
There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1400
final spin speed will also reduce the in‐
1200
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot‐
1200
tons programme, an additional rinse is
1200
introduced.
1400
To omit the final spin (Rinse
600
hold)
1200
 Press the Spin button until the 
600
(Rinse hold) indicator light comes on.
1400
The laundry will not be spun and will
1400
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
immediately after the end of the pro‐
gramme.
– To start the final spin:
Use the Spin button to select the
spin speed you want. The machine
will begin the final spin.
– Press the Door button. the water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin
and the final spin
 Press the Spin button repeatedly until
the  light comes on.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in. In some pro‐
grammes an additional rinse is intro‐
duced with this setting.