Changing The Sound; Virtual Surround Setting - Sony SLV-D350P Service Manual

QQ
3 7 63 1515 0
To return to normal play
Select "Off" or press CLEAR in step 2.
Notes
• You cannot repeat play with DVD-RW in VR mode.
• You cannot repeat play VIDEO CDs with PBC function on. See "Playing VIDEO CDs with
"PBC ON/OFF" Functions" on page 97.
TE
L 13942296513
Various play mode functions (Program play, Shuffle play, Repeat play)

Virtual surround setting

When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy surround
sound effects by using sound imaging to create
virtual rear speakers from the sound of the front
speakers without using actual rear speakers.
1
Press SURROUND during playback.
2
Press B/b repeatedly to select "Surround1," "Surround2," "Surround3."
Surround effect increases as shown below.
Surround1 Surround2
TV
www
.
http://www.xiaoyu163.com
85
SURROUND
B/b
Off
Surround3
TV TV
x ao u163
y
: Virtual speaker
i
continued
87
Virtual surround setting
http://www.xiaoyu163.com
2 9
8

Changing the sound

When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, or
DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also select the language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
Karaoke VIDEO CD containing a song with
the vocals on the right channel and the
instruments on the left channel, you can hear
the instruments from both speakers by
selecting the left channel.
Playback
Disc type
instruments only
Karaoke VIDEO CD Yes
Karaoke DVD No
To enjoy Dolby Digital or DTS effect from a
LinearPCM format disc, you have to make
the connection as shown on page 62.
B-2
1 Press AUDIO during playback.
2 Press B/b repeatedly to select the desired language/audio setting.
• When playing a DVD
Depending on the DVD, the choice of language varies.
Refer to "DVD Audio/Subtitle Language" on page 125 for the
abbreviation of the language.
• When playing a VIDEO CD or CD
The default setting is indicated in bold print.
Stereo
Left
Right
Q Q
3 6 7 1 3
86
Changing the sound
To cancel the setting
Select "Off" in step 2.
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set "Dolby
Digital" to "Dolby Digital" or "DTS" to "On" in "AUDIO SETUP" menu (page 65), sound
will come from your speakers but it will not have the surround effect.
• If you activate the surround effect, the sampling frequency is converted to 48kHz/16bit.
.
88
Virtual surround setting
1-20
9 4 2 8
AUDIO
B/b
ENG DOLBY DIGITAL 3/2.1CH 1/2
The standard stereo sound
The sound of the left channel (monaural)
The sound of the right channel (monaural)
1 5 0 5 8 2 9 9 4
m
co
9 9
B b
2 8 9 9