Playing A Tape; Recording Tv Programs - Sony SLV-D350P Service Manual

QQ
3 7 63 1515 0

Playing a tape

Before you start ...
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
1
Insert a tape.
The VCR starts playing automatically if
you insert a tape with its safety tab
removed.
TE
L 13942296513
Playback options
Play in slow motion
Play frame by frame
Play at various speeds
(Shuttle play)
To resume normal playback
Press H PLAY.
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to "0:00:00." To search for the counter 0:00:00 point
automatically, see "To search for the counter 0:00:00 point" on page 102.
To display the counter on the TV screen, press DISPLAY during normal playback.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes during pause.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
• The counter resets to "0:00:00" whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• When 10 hours have passed, the counter in the display window returns to "0:00:00" and the
count starts over again.
• The sound is muted during playback at various speeds.
• The picture may show noise when playing at high speed in reverse.
• While playing a tape, you can display the setup menu, but the remote commander's function
switches to DVD automatically. Press O RETURN repeatedly to exit the menu.
www
• When playback does not start even if you insert a tape with its safety tab removed, set "Auto
Play" to "On" in the "VIDEO FUNCTION SETUP" menu (page 104).
• Stop disc playback while playing back a video.
• The VCR can also play S-VHS tapes. The VCR will automatically identify the type of tape
inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in the VCR, the
enhanced resolution will not be visible on screen; there may also be picture distortion while
playing the S-VHS tape in slow motion or while utilizing other special playback modes. The
.
VCR will not record in S-VHS mode on an S-VHS tape.
http://www.xiaoyu163.com
?/1
Z
TRACKING +/–
CLEAR
/
m/M y
./>
X PAUSE
x STOP
H PLAY
DISPLAY
continued
Playing a tape
Operation
During pause, press y.
During pause, press SKIP.
During playback, press .or >. You can change the
playback speed as follows.
–× 7 y –× 5 y –× 3 y STILL y SLOW y PLAY
y × 2 y × 3 y × 5 y × 7
x ao u163
y
i
Playing a tape
http://www.xiaoyu163.com
2 9
8
Press H PLAY.
2
The display window shows the
playback time.
When the tape reaches the end,
it will rewind automatically.
Additional tasks
To
Stop play
Pause play*
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
* If you pause the VCR for more than 5 minutes, the VCR will automatically resume play.
To play a recently watched scene
You can immediately rewind and playback the scene you want to watch again.
During playback, press
the SP mode (about 15 seconds in the EP mode) on the counter for each press of the
button, and restarts playback.
To skip playback
You can skip a scene that you do not want to watch (such as a commercial) and restart
playback.
During playback, press
each time the button is pressed (up to four times) and playback is resumed.
To turn off the power while rewinding (Rewind Shut Off)
Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep
rewinding until it reaches the end.
To play/search at various speeds
Playback options
View the picture during fast-
forward or rewind
Play at high speed
Q Q
3 6 7 1 3 1 5
41 42
Playing a tape

Recording TV programs

Before you start ...
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 10).
• To record from a cable box, turn it on.
• Make sure the tape is longer than the total
recording time.
1
Insert a tape with its safety tab in place.
2
Press CH +/– to select the channel or line input video source you want to
record.
co
.
43 44
Recording TV programs
1-9
9 4 2 8
Hour Minute Second
Press
x STOP
X PAUSE
X PAUSE or H PLAY
M during stop
m during stop
Z
REPLAY. The VCR rewinds the tape about 10 seconds in
SKIP. The VCR skips the tape 30 seconds on the counter
Operation
During fast-forward, hold down M. During rewind, hold
down m.
• During playback, briefly press M or m. The tape
continues to play at 5 times normal speed.
• During playback, hold down M or m. The tape
continues to play at 5 times normal speed. When you
release the button, normal playback resumes.
0 5 8 2 9 9 4 2 8
?/1
Z
CH +/–
Number buttons
TV/VIDEO
INPUT
SELECT
z REC
SP/EP
x STOP
H PLAY
ENTER
DISPLAY
m
9 9
9 9