Changing The Sound; Virtual Surround Setting - Sony SLV-D300P Service Manual

To cancel the bookmark
Press CLEAR after step 3.
To exit the Bookmark menu
Press BOOKMARK.
To playback the scene where you insert a bookmark
1
Press BOOKMARK during playback.
2 Press B/b to select the bookmark placeholder, then press H PLAY to play the
bookmark.
Note
• Depending on the DVD, you may not be able to use the bookmark function.
68
Using bookmarks

Virtual surround setting

When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy surround
sound effects by using sound imaging to create
virtual rear speakers from the sound of the front
speakers without using actual rear speakers.
This function is designed to work with the LINE
OUT AUDIO L/R jacks.
1
Press SURROUND during playback.
2
Press SURROUND repeatedly to select "On."
To cancel the setting
Select "Off" in step 2.
70
Virtual surround setting
SURROUND
1-16

Changing the sound

When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, or
DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also change the language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
1
Press AUDIO during playback.
2 Press B/b repeatedly to select the desired language/audio setting.
• When playing a DVD
Depending on the DVD, the choice of language varies.
Refer to "DVD Audio/Subtitle Language" on page 106 for the
abbreviation of the language.
• When playing a VIDEO CD or CD
The default setting is indicated in bold print.
STEREO
The standard stereo sound
Left The sound of the left channel (monaural)
Right The sound of the right channel (monaural)
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set "Dolby
Digital" to "Dolby Digital" or "DTS" to "On" in "AUDIO SETUP" menu, sound will come
from your speakers but it will not have the surround effect.
• Certain audio features of this product manufactured under a license from Desper Products,
®
Inc. Spatializer , VBX™ and the circle-in-square device are trademarks owned by Desper
Products, Inc.
AUDIO
B/b
69
Changing the sound
71
Virtual surround setting