Nx-Sw150 Disassembly Procedures; Removal Of Front Grille; Removal Of Rear Panel - Yamaha DVR-S150 Service Manual

NX-SW150 DISASSEMBLY PROCEDURES

(Remove parts in disassembly order as numbered.)

1. Removal of Front Grille

The Front Grille is fixed to the cabinet with dowels
at 6 locations. As a screwdriver (for slotted head
screw) is used for removal, use special care not to
cause damage to the cabinet.
a. Using the screwdriver inserted in the gap between
the Front Grille and the cabinet (bottom side first),
push up the Front Grille.
b. Remove the Front Grille by lifting it up.
* When installing the Front Grille, apply quick-drying
bond to the dowels and then fit them into dowel holes
for secure installation. (The Front Grille will come off
easily if its dowels are fitted into dowel holes only.)

2. Removal of Rear Panel

Remove 14 screws ( q ) in Fig. 2.
* Arrow marks (
be removed.
* When assembling the Rear Panel, check to ensure that
the packing is not damaged so as to prevent air leakage
from occurring.
Downloaded From TheatreSystem-Manual.com Manuals
) are printed to identify the screws to
Fig. 1
q
Fig. 2
DVR-S150/NX-P150
q
19