Using The Camera - UTStarcom PPC6800 Quick Start Manual

20

9. Using the Camera

Taking photos and recording video clips along with audio is easy with your device's built-in camera.
Launch the camera
Do one of the following:
•
Press and hold the CAMERA button on your device.
• Tap Start > Programs > Camera.
• Tap Start > Programs > Pictures & Videos, then tap
the Camera icon.
To exit the camera, tap the Exit icon (
Capture a still image
1.
After launching the camera, tap
left or right to select the Photo capture mode.
2.
Press the CAMERA button, the ENTER button, or Jog Wheel to capture a still image.
Capture a video clip
1. After launching the camera, tap
left or right to select the Video capture mode.
2. Press the CAMERA button, the ENTER button, or Jog Wheel to start recording a video clip. To stop
recording, press again.
) on the screen.
or at the upper left side of the screen, or press NAVIGATION
or at the upper left side of the screen, or press NAVIGATION
Camera screen