Typical Unit Parts Arrangement - Lennox XC17 Series Unit Information

Typical Unit Parts Arrangement

WIRE TIE
SLEEVE
OUTDOOR AMBIENT
TEMPERATURE
SENSOR (RT13)
HIGH DISCHARGE LINE TEMPERATURE
MUFFLER
FIELD CONNECTION
FOR SUCTION LINE
SUCTION LINE SERVICE
VALVE PORT
SUCTION LINE SERVICE
VALVE
LIQUID LINE SER-
VICE VALVE PORT
LIQUID LINE SER-
VICE VALVE
FIELD CONNECTION
FOR LIQUID LINE
SET
LIQUID LINE FILTER
DRIER (SINGLE FLOW)
SECOND GROUND LUG FOR SOURCESOURCEt
GROUND LUG
CONTACTOR−1POLE (K1−1)
HIGH VOLTAGE FIELD
CONNECTIONS
SENSOR (RT28)
COMPRESSOR
HARNESS
LOW PRESSURE
SWITCH (S87)
Figure 1. Typical Parts Arrangement
AIR CONDITIONER
CONTROL (A175)
EXTERNAL SURGE
PROTECTION USED ON
XC17−XXX−230−01 AND −02
ONLY). LATER VERSIONS
INCORPORATE FEATURE
INTO FAN MOTOR.
Page 5
FAN MOTOR CONTROL (A177)
CONTROL BOX
VIBRATION ISOLATOR
SLEEVE LOCATIONS (DO
NOT REMOVE)
SR1 SOUND DOME
CRANKCASE
THERMOSTAT (S40)
HIGH PRESSURE SWITCH
(S4)
CAPACITOR (C12)
XC17