Installing The Filter Cartridge; Using The Water Purifier - Philips Micro Pure WP3811 User Manual

installing the filter cartridge

1 Make sure the tap is closed.
2 Set the water selection lever to the unfiltered stream
position (Fig. 22).
3 Tilt the filter cartridge 90° backwards and insert it into the water
purifier housing. (Fig. 23)
4 Pull the cartridge upwards until it is in upright position. (Fig. 24)

using the water purifier

1 Make sure that the water purifier housing and the filter cartridge
are properly installed.
2 Turn the water selection lever to the desired setting ('click').
Filtered spray
Select this setting for drinking, washing vegetables or fruits and
for cooking.
1 Turn the water selection lever until the filtered spray symbol is
aligned with the indicator (Fig. 25).
Do not let water hotter than 50°C run through the water purifier at
this setting, as this may damage the water purifier.
If you filter water between 35°C and 50°C, the water may have an
unpleasant smell. The filter cartridge has absorbed this smell during
filtering, but releases it again if you filter water hotter than 35°C.
unfiltered spray
Select this setting for washing dishes and other jobs that require a gentle
water flow.
1 Turn the water selection lever until the unfiltered spray symbol is
aligned with the indicator (Fig. 26).
English
11