Adjusting The Projector's Elevator; Operation - Dukane 8104WB User Manual

Adjusting the projector's elevator

The projector has Front foot for inclinations and Rear foot for horizontals. Spacers
on the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Front foot
Spacer
WARNING ►Keep the spacers away from children and pets. Be careful not
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
NOTE • The adjustment angle can be adjusted up to plus or minus 1° each
of Front and Rear foot.
• After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
Install Large on the Front foot and Small on the Rear foot of the spacer. If change
the setting place of the projector, it will recommend keep and reuse the spacers.

Operation

INPUT button
FOCUS - button
FOCUS + button
Displaying and switching the image
Press the INPUT button on the projector. Each time you press the button, the
projector switches its input port in turn. You can also use the remote control to
select an input signal. Press the VIDEO button for selecting an input signal from
the HDMI, S-VIDEO or VIDEO port, or the COMPUTER button for selecting an
input signal from the COMPUTER IN1, COMPUTER IN2, LAN, USB TYPE A or
USB TYPE B port.
Rear foot
2.3~4.3°
Front foot
Rear foot
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY PAGE
FREEZE
ON
OFF
MY BUTTON
KEYSTONE
1
FOCUS
- +
POSITION
ENTER
ESC
12
Spacer (Large)
Spacer (Small)
BLANK
VOLUME COMPUTER button
UP
＋
VIDEO button
DOWN
ー
MUTE
2
D-ZOOM
- +
MENU
RESET
-1~1°