Table of Contents
Advertisement
Quick Links
Projector
8105HA/8106HA/8104HWA
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING ►Before using this product, be sure to read all manuals for this
product. See the "Using the CD manual" (19) to read the manuals in the CD.
After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, "the
manuals" means all the documents provided with this product, and "the product"
means this projector and all the accessories came with the projector.
Contents
First of all ............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................
Contents of package........................... 4
Arrangement ....................................... 5
Connecting with your devices ............. 6
Connecting power supply ................... 7
Using the cable cover ......................... 8
Preparing for the remote control ......... 9
Turning on the power ........................ 10
Adjusting the projector's elevator ..... 11
Operation .......................................... 11
Turning off the power ........................ 13
Replacing the lamp ........................... 14
3
Caring for the mirror and lens ........... 18
Using the CD manual ....................... 19
Specifications ................................... 20
- Warranty and after-service ........... 21
430-8104HWA-8105HA-8106HA-Concise-00
1
Advertisement
Table of Contents
Related Manuals for Dukane 8105HA
Summary of Contents for Dukane 8105HA
-
Page 1: Table Of Contents
Projector 8105HA/8106HA/8104HWA User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. -
Page 2: First Of All
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage. -
Page 3: Regulatory Notices
Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. -
Page 4: About Waste Electrical And Electronic Equipment
Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. -
Page 5: Arrangement
Arrangement Refer to tables T-1 or T-2 and figures F-1 and F-2 at the end of this manual to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. Screen size (diagonal) Projection distance (±8%) Screen height (±8%) b1 , b2... -
Page 6: Connecting With Your Devices
Arrangement (continued) Connecting with your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Refer to figures F-3 to F-5 at the back of this manual. -
Page 7: Connecting Power Supply
Connecting with your devices (continued) NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker. • This projector doesn't support plug-in power for the microphone. • The COMPUTER IN1/2 port can support a component signal also. The specific adapter or the specific cable is required for a component video input to the projector. -
Page 8: Using The Cable Cover
Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector first. Combine parts as shown in figure, and assemble the cable cover. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure. -
Page 9: Preparing For The Remote Control
Preparing for the remote control Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. -
Page 10: Turning On The Power
Turning on the power STANDBY/ON button POWER indicator Make sure that the power cord is firmly and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange. Confirm that there is nothing that the MY SOURCE/ MY SOURCE/ VIDEO... -
Page 11: Adjusting The Projector's Elevator
Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments. -
Page 12: Operation
Focusing ASPECT button Use the FOCUS + and FOCUS – buttons on MY SOURCE/ the projector or remote control to adjust the VIDEO COMPUTER DOC.CAMERA VOLUME+/- button ASPECT AUTO SEARCH BLANK screen focus. MAGNIFY PAGE VOLUME FREEZE ＋ DOWN Selecting an aspect ratio ー... -
Page 13: Turning Off The Power
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the POWER indicator projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Confirm that there is nothing that the lens door hits while closing. Press the STANDBY/ON button again while the MY SOURCE/ MY SOURCE/... -
Page 14: Replacing The Lamp
Replacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. - Page 15 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
-
Page 16: Cleaning And Replacing The Air Filter
Cleaning and replacing the air filter The air filter has two kinds of filters inside. Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. -
Page 17: Replacing The Internal Clock Battery
Replacing the internal clock battery This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL or HITACHI MAXELL ENERGY, part number CR2032 or CR2032H. Turn the projector off, and unplug the Battery Cover power cord. -
Page 18: Caring For The Mirror And Lens
Caring for the mirror and lens If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet. -
Page 19: Using The Cd Manual
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows OS:Microsoft ®... -
Page 20: Specifications
Specifications Item Specification Product name Liquid crystal projector 8105HA, 8106HA: 786,432 pixels (1024 horizontal x 768 vertical) Liquid Crystal Panel 8104HWA: 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 210W UHP Speaker Power supply AC 100-120V/3.1A, AC 220-240V/1.6A Power consumption... -
Page 21: Troubleshooting - Warranty And After-Service
They will tell you what warranty condition is applied. Please check the following web address where you may find the latest information for this projector. Product www.dukane.com/av information and Manuals : NOTE • The information in this manual is subject to change without notice. - Page 22 • On a horizontal surface • Mounted on the wall or ceiling C8105HA, 8106HAN (1024 x 768) (±8%) Projection distance Screen height Screen size (diagonal) inch inch inch inch type(inch) 0.096 0.403 15.9 0.281 11.1 1.196 47.1 0.161 0.467 18.4 0.317 12.5 1.384...
- Page 23 Access point Computer VCR/DVD/Blu-ray Disc player COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 MONITOR OUT CONTROL VIDEO AUDIO IN2 Microphone Speakers Monitor system (with an amplifi er) RGB IN USB storage device COMPUTER IN2...
- Page 24 Computer Access point RS-232C COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 MONITOR OUT CONTROL AUDIO IN2 VIDEO [unit: mm]...
- Page 25 DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukane.com/av 430-8104HWA–8105HA-8106HA-Concise-00...