Advertisement
Quick Links
Projector
8103H
User's Manual (detailed)
Technical
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1280 x 768
1400 x 1050
1280 x 800
NOTE • Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200), the signal will be converted to the projector's panel resolution before
being displayed. The best display performance will be achieved if the resolutions
of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
8103H-T-00 Tech
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
91.2
75.0
47.7
65.3
49.7
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
W-XGA (60Hz)
SXGA+ (60Hz)
1280 x 800 (60Hz)
1
Advertisement
Related Manuals for Dukane 8103H
Summary of Contents for Dukane 8103H
- Page 1 • Automatic adjustment may not function correctly with some input signals. • The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G. 8103H-T-00 Tech...
- Page 2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE Menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d)
- Page 3 Connection to the ports Connection to the ports COMPUTER IN1 MONITOR OUT COMPUTER IN2 AUDIO CONTROL S-VIDEO AUDIO IN VIDEO AUDIO IN3 COMPUTER IN1, COMPUTER IN2, MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) •...
- Page 4 Connection to the ports (continued) COMPUTER IN1 MONITOR OUT COMPUTER IN2 AUDIO CONTROL S-VIDEO AUDIO IN VIDEO AUDIO IN3 (component video) RCA jack x3 • System: 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60, 1080i@50/60, 1080p@50/60 Port Signal Component video Y, 1.0±0.1Vp-p, 75Ω terminator with composite sync Component video C , 0.7±0.1Vp-p, 75Ω...
- Page 5 Connection to the ports (continued) COMPUTER IN1 MONITOR OUT COMPUTER IN2 AUDIO CONTROL S-VIDEO AUDIO IN VIDEO AUDIO IN3 AUDIO IN1, AUDIO IN2 Ø3.5 stereo mini jack • 200 mVrms 47kΩ terminator AUDIO IN3 RCA jack x2 • 200 mVrms 47kΩ terminator AUDIO OUT Ø3.5 stereo mini jack •...
- Page 6 Connection to the ports (continued) COMPUTER IN1 COMPUTER IN2 MONITOR OUT AUDIO CONTROL S-VIDEO AUDIO IN VIDEO AUDIO IN3 CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Signal Signal Signal (No connection) (No connection) Ground (No connection)
-
Page 7: Connecting The Cable
RS-232C Communication RS-232C Communication CONTROL port RS-232C cable (cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) - Page 8 RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the following request code from the PC to the projector. Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set command) (1) Send the following setting code from the PC to the projector.
- Page 9 RS-232C communication RS-232C communication command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60 01 00 BE EF...
- Page 10 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 steps gray scale BE EF 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale...
- Page 11 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 CUSTOM-1 (HIGH) BE EF 06 00 CB F8 01 00 B0 30 13 00 BE EF 06 00...
- Page 12 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR BE EF 06 00 B5 72 02 00 02 22 00 00 Increment BE EF 06 00 D3 72 04 00 02 22 00 00 Decrement BE EF 06 00 02 73...
- Page 13 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00 09 22 00 00 Decrement BE EF 06 00...
- Page 14 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK – TURN OFF BE EF 06 00 3B C2 01 00 50 30 00 00 COMPUTER1 TURN ON BE EF 06 00 AB C3 01 00 50 30 01 00 BE EF...
- Page 15 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code PERFECT FIT BE EF 06 00 FD 89 02 00 24 21 00 00 Right Top corner -V Increment BE EF 06 00 9B 89 04 00 24 21 00 00 Decrement...
- Page 16 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code MONITOR OUT - COMPUTER1 BE EF 06 00 3E F4 01 00 B0 20 00 00 COMPUTER1 TURN OFF BE EF 06 00 CE B5 01 00 B0 20 FF 00 BE EF...
- Page 17 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code AUDIO-COMPUTER1 Set AUDIO1 BE EF 06 00 6E DC 01 00 30 20 01 00 AUDIO2 BE EF 06 00 9E DC 01 00 30 20 02 00 AUDIO3 BE EF 06 00...
- Page 18 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 (* See the bottom of FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00 this page.)
- Page 19 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code BLANK On/Off TURN OFF BE EF 06 00 FB D8 01 00 20 30 00 00 TURN ON BE EF 06 00 6B D9 01 00 20 30 01 00 BE EF 06 00...
- Page 20 RS-232C communication (continued) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-2 COMPUTER1 BE EF 06 00 C6 32 01 00 01 36 00 00 COMPUTER2 BE EF 06 00 06 30 01 00 01 36 04 00 COMPONENT BE EF 06 00...