Kenwood KAC-718 Instruction Manual page 6

Connection
RCA cable connection
2CAUTION
Do not connect cables and leads
to both RCA cable input jacks
and the speaker input terminals
simultaneously, for this may
cause malfunction or damage.
Left input
RCA cable ground terminal
When using an RCA cable with
a ground lead attached, connect
the ground lead to this terminal.
Speaker level input connection
Left output
Right output
Speaker level input terminals
Lead terminal
(Commercially
available parts)
2CAUTION
• The genuine-accessory car stereo shall have a maximum power output of no more than 25 W.
• Do not connect the speaker output leads from a power amplifier (Optional) to the speaker input
terminals of this unit, for this may cause malfunction or damage.
• Do not connect cables and leads to both RCA cable input jacks and the speaker input terminals
simultaneously, for this may cause malfunction or damage.
• Connect the power control lead to a power supply which can be turned ON/OFF by the ignition
key switch (ACC line).
With this connection, shock noise may be generated when the power of the genuine-accessory
car stereo is switched ON/OFF.
6
English
Left output (White)
Right output (Red)
Right input
LINE IN INPUT SENSITIVITY(V) BASS
ENPHASIS
1.0
90 120
L OFF
0.5 50
1 70
0.3
MIN MAX 30 200
R
LOWPASS FILTER
FREQUENCY(Hz)
GND
Left input
LINE IN INPUT SENSITIVITY(V)
ENPHASIS
1.0
90 120
L OFF
0.5 50
1 70
0.3
MIN MAX 30 200
R
LOWPASS FILTER
FREQUENCY(Hz)
GND
RCA cable
(Commercially
available part)
SPEAKER LEVEL INPUT
LEFT RIGHT
BATT
ON
2CAUTION
Do not use this terminal for power source
grounding. This unit will be damaged if the
power source grounding wire is connected
to this terminal.
Genuine-accessory
car stereo
Right input
BASS
SPEAKER LEVEL INPUT
LEFT RIGHT
BATT
ON
CENTER UNIT
(Cassette receiver,
CD receiver, etc.)
Power control cable
(Commercially
available part)
POWER IN
FUSE(25A)
GND
P.CON(REMOTE)
ACC
Car fuse
box
+ -
Battey
POWER IN
FUSE(25A)
GND
P.CON(REMOTE)