Galileo Milano 3G Owner's Manual page 22

SEQUENCE
This feature provides the possibility to set performance parameters such as voice, style etc for range
of the measures in advance, and then recall it. Your performance setting will activate automatically
following the measure you are playing. There are 5 sequencers available. Each has 10 switch points to
determine the measure.
Call the sequencer: In the SEQUENCE window, the sequencer number is shown
at the right top of the screen. Use the +/- button to select sequencer. Use the
navigation buttons to review the settings.
Edit the sequencer: Press the EDIT button, the sequencer number will turn to
black; use the navigation buttons to choose item to edit. Use the +/- buttons to
edit.
Press the EXIT button or press the USER REG button again to exit from the
sequencer window; the editing results will be saved automatically. You can reset
the factory default presetting. Please refer to <SETUP> section for details.
Performance with sequencer: When the Style in the table is set to OFF, press the
PLAY/STOP button. After two measures of the metronome sound, the sequencer
will start running and you can play along with it. The progress line will move down
to indicate settings for the current measure.
M I C R O G R A N D D I G I T A L P I A N O 23