Battery Mode - ICA SE1000 Operating Manual

COMMUNICATIO N
INTERFACE
FAN
INP UT
BREAKER
INP UT
SO CKE T
NET S URG E
PROTECTION
Gbr. 2.Panel belakang SE2000 & SE3000
Hal 5
INTERNAL
SNMP SLOT
BATTE RY
SO CKE T
OUTPUT
OUTPUT
WIRING
SO CKE T

4.2.3. Battery mode

On battery mode, the indication and displays are as following figure:
Fig. 6.Battery mode
Green LED is on, LCD displays: Status is "on batt".
o On battery mode, the buzzer will beep once every 4 seconds to provide an
audible alarm, press and hold the function button for more than 1 second,
the buzzer will stop beeping, press and hold the FUNCTION button for one
more second, the buzzer will beep again.
o If battery capacity graph in the graphic section (the third row on LCD
display) flashes, yellow LED is on, the buzzer beeps once every second, it
means the battery voltage is discharged to minimum protection voltage, and
reminds users that the battery capacity is diminished and should save all
datas and works and then switch off the equipments.
o You can test UPS back up function by disconnecting the utility.
o If the "INPUT' letters in the item section (the second row on LCD display)
flashes, it means the input voltage or frequency is beyond the extension.
HZ
VAC
OUTPU T
Page 10