JVC KD-LH3101 Service Manual page 7

QQ
3 7 63 1515 0
2.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedures, remove the bot-
tom cover.
(1) Remove the three screws E, screw F and three screws G
on the back side of the main body.
(2) Remove the rear bracket.
REFERENCE:
During reassembly, before fixing the rear bracket onto
the main body, insert the SUB WOOFER cable and
STEERING REMOTE cable into the slots.
2.1.6 Removing the main board
(See Fig.7)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink and rear bracket.
(1) Remove the two screws H attaching the main board.
(2) Disconnect the connector CN601 and remove the main
board in an upward direction.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Rear bracket
E
CN601
H
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
G F G
Insert Subwoofer and steering
cables into the slots.
Fig.6
Main board
0 5 8 2 9 9 4 2 8
Fig.7
m
(No.49843)1-7
9 9
E
H
9 9